Starlight-xpress SXV-M9 Manuel d'utilisateur télécharger pdf (Page 25)

Handbook for SXV-M9 Issue 1 June 2004

of your mount. This output is ‘active low’ (i.e. the control relays pull the guider inputs

down to zero volts when applying a guide correction) and matches most of the

autoguider inputs on commercial mounts. If ‘active high’ inputs are needed, or a very

low control voltage drop is essential, then you will need to add a Starlight Xpress

‘relay box’ between the guider output and the input to the mount. Please contact your

local distributor if a relay box is required. Some mounts (Vixen, for example) use a

similar guider input socket, but have re-arranged connections. Details are given on our

web pages at the end of the ‘STAR2000’ section.

The autoguider installed on a 80mm refractor guide ‘scope in the author’s garden

To use the autoguider, please proceed as follows:

1) Having started the SXV-M9 software, open the autoguider control panel by

clicking on the autoguider menu button.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30

Pas de commentaire

Starlight-xpress SXV-M9 Manuel d'utilisateur Page 25